Copper

Product Details:

Trychem Metal And Alloys manufacture high quality PVC coated copper tubes & copper coils designed for protection against aggressive environment and colour coded to aid identification. Copper tube with a PVC sheath may be an effective method of protection against attack in harsh operating conditions.

The PVC is tightly extruded onto the tube and is available in black, white, blue, yellow and green colours according to customer requirements. Material used to coat copper tubes is polyvinylchloride (PVC) of the following characteristics.

Copper tubes meet the specifications of international standards like ASTM-B-75/68 and UNS C12200. Tests are conducted as per specification for Physical & Mechanical properties & Chemical Composition. ECT is conducted for bare tubes. Finally, PVC Coating is done as per ASTM-D-1047. PVC Coated tube is ensured leak proof after conducting pressure drop test.

PRODUCT APPLICATION AREAS
LPG Gas Kits
Oil & Gas Industries
Instrumentation Industries
Plumbing & Drainage

Standard Sizes, thickness of copper tube and PVC can be as per requirement. Other sizes as per requirement subject to our confirmation can be manufactured.

Technical Specification :

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Trychem Metal And Alloys manufacture high quality PVC coated copper tubes & copper coils designed for protection against aggressive environment and colour coded to aid identification. Copper tube with a PVC sheath may be an effective method of protection against attack in harsh operating conditions.

The PVC is tightly extruded onto the tube and is available in black, white, blue, yellow and green colours according to customer requirements. Material used to coat copper tubes is polyvinylchloride (PVC) of the following characteristics.

Copper tubes meet the specifications of international standards like ASTM-B-75/68 and UNS C12200. Tests are conducted as per specification for Physical & Mechanical properties & Chemical Composition. ECT is conducted for bare tubes. Finally, PVC Coating is done as per ASTM-D-1047. PVC Coated tube is ensured leak proof after conducting pressure drop test.

PRODUCT APPLICATION AREAS
LPG Gas Kits
Oil & Gas Industries
Instrumentation Industries
Plumbing & Drainage

Standard Sizes, thickness of copper tube and PVC can be as per requirement. Other sizes as per requirement subject to our confirmation can be manufactured.

Technical Specification :

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Copper Plates (C101/C102/C103/B170/B379) are manufactured in compliance with the specific process demands of different industry sectors. These Copper plates are developed so as to deliver best possible durability, strength as well as resistance against corrosion. With the Copper plates made available in varied sizes and shapes, here our expertise also lies in custom designing these plates as per client’s specific requirements.

Product Details:

Trychem Metal And Alloys offers a wide range of Seamless Copper Tubes. These tubes are supplied in both Hard Drawn Straight Length & Bright annealed Pancake Coils. These tubes are manufactured as per International and National Standards required by client.

All tubes are electronically tested by Eddy Current method, as per the requirements of ASTM E 243.

Trychem Copper tubes are 100% carbon free. All tubes are cleaned and sample tested to meet the residual requirements as specified by the codes at 0.038g/m2 (0.35g/ft2).

Coils are normally furnished in ‘O60’ temper and straight lengths in H58 temper.

100% RoHS Compliance.

Product Details:

Trychem Metal And Alloys is one of the foremost manufacturers of copper tubes used for General Engineering. Copper tubes are preferred in General Engineering because of its thermal and electrical conductivity, malleability, high resistivity to corrosion and quality strength. We manufacture and export copper tubes based on various specifications as per client design.

Our manufacturing is in compliance with BS 2871 – 2 / 72 C 106.

Product Application:
Copper tubes is highly utilized in Evaporators
Hydraulic Lines
Oil Burner Tubes
Automobile, Plumbing
Thermal power plant
Oil and gas industry
Petrochemical
Refinery
Chemical and Fertilizers

Copper tube is used for electrical purpose mainly due to its High Conductivity. We take special privilege in producing high quality copper tubes taking its roundness, wall thickness and straight length into consideration.

Product Details:

Trychem Metal And Alloys offers a wide range of Seamless Copper Tubes. These tubes are supplied in both Hard Drawn Straight Length & Bright annealed Pancake Coils. These tubes are manufactured as per International and National Standards required by client.

All tubes are electronically tested by Eddy Current method, as per the requirements of ASTM E 243.

Trychem Copper tubes are 100% carbon free. All tubes are cleaned and sample tested to meet the residual requirements as specified by the codes at 0.038g/m2 (0.35g/ft2).

Coils are normally furnished in ‘O60’ temper and straight lengths in H58 temper.

100% RoHS Compliance.

Technical Specification:

Product Details:

We are the reputed manufacturers and suppliers of quality and precision finished Copper Sheets(C101/C102/C103/B170/B379) including Copper Hot Rolled Sheets and Copper Cold Rolled Sheets.

These sheets are perfectly matched up with the end applications such as crafts, embossing, manufacturing, electrical applications, building construction, transmission, power generation, industrial machinery and other similar applications. Other than this, the Oxygen Free Copper sheets also find application as electrical conductors, hardware use in electrical circuits, switch terminals, electrical contacts and other areas.

Available Sizes:

Width : From: 300mm up to 1250mm

Length : From: 1250mm up to 2500

Thickness : From :0.3 up to 8mm and above

Product Details:

Trychem Metal And Alloys is one of the leading manufacturers and suppliers of optimum quality copper rods. These rods are known for their dimensional accuracy, high grade raw material, structural robustness and superior finish. Engineering sector and electrical industry find maximum usage of these copper rods.

Trychem Metal and Alloys manufactures extruded and drawn copper rods in many shapes such as round, hexagonal, square or rectangular bars and in various dimensions.

Anti microbial properties of copper makes copper rods the most effective material for hygienic touch surfaces (in hospitals and other healthcare facilities or public buildings).

FORM AND LENGTH:
STRAIGHT LENGTH:
Drawn round, hexagonal and square rods: 2000 - 4000 (soft temper max. 3000 mm)
Drawn bars: 2000 - 6000 (soft temper max. 3000 mm).
Extruded rods and bars: 1000 - 4000 mm
“On customer's request, upon agreement, other sizes, lengths and properties are also possible.”

GRADES:
OXYGEN FREE HIGH CONDUCTIVITY COPPER (OFHC).
ELECTROLYTIC TOUGH PITCH (ETP).
CHROMIUM COPPER.
CADMIUM COPPER.
SILVER BEARING COPPER.

VARIOUS OTHERS GRADES ON REQUEST.

Product Details:

Brass Hex are appropriately used in low-strength assemblies where corrosion resistance is a primary threat. With drive system having a hexagon-shaped head, the fine threads allow better tapping into harder materials as well as in thin walls and ensure a lasting hold. We are a well known manufacturer of Brass Hex Bars and Rods.

These hex bars & rods are strong in tension in comparison to coarse threads that make these used in various industries.

Manufactured from best quality brass, the flawless finish quality of these hex rods also helps in rendering optimal level of satisfaction. Here, we also ensure that these brass hex bars are made available at most reasonable prices.

Product Details:

Being the eminent organization of the concerned field, we are trading and supplying a superior quality Brass Flat Bars. These bus bars are used in various applications like control panels, automobiles, engineering, electronic and electrical, etc. We offer different forms and sizes of bus bars that are manufactured and tested at the trustworthy vendor's end. The offered bus bars are highly demanded, owing to their performance, reliability and low maintenance and lastly, their cost-effectiveness.

Product Details:

With superior finish and performance values, our range of Brass Rods are available in different shapes, sizes as well as thicknesses as per the clients' given requirements.

Applications:

• Sugar Industry
• Plumbing
• Furniture
• General Engineering
• Ammunition
• Bore Hole Tubes

Salient features:

• Corrosion resistant
• High tensile strength
• Tight dimensional tolerances
• Excellent straightness
• Superior surface characteristics

Available Shapes: Round Rods, Square Rods, Hexagonal Rods, Octagonal Rods and Hollow Rods

Product Details:

With superior finish and performance values, our range ofBrass Flat Bars are available in different shapes, sizes as well as thicknesses as per the clients' given requirements.

Applications

• Sugar Industry
• Plumbing
• Furniture
• General Engineering
• Ammunition
• Bore Hole Tubes

Salient features

• Corrosion resistant
• High tensile strength
• Tight dimensional tolerances
• Excellent straightness
• Superior surface characteristics

Product Details:

Trychem Metal And Alloys pressurized ACR/Med copper tubing is available in 10,12, and 20 ft. lengths, and a variety of sizes, both Type L and Type K.

Each product conforms to ASTM B-280/B-819 specifications, is specially cleaned, de-burred, purged and pressurized with nitrogen gas, and features easy to remove, installer friendly, rubber plugs.

Trychem Metal And Alloys uses modern and environment friendly aqueous degreasing system to achieve the ASTM B 280 cleanliness limit of less than 0.0035 g/sq. ft on interior surfaces.

Particularization should be given to:
·         Site Cleaning of tubes and components.
·         Pipeline gas purging during brazing.
·         Use of approved filler metals and fluxes.
·         Post brazing cleaning and visual inspection of all joints.
·         Full compliance with pressure and containment testing, before final approval and use.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Trychem Metal And Alloys offers a wide range of Seamless Copper Tubes. These tubes are supplied in both Hard Drawn Straight Length & Bright annealed Pancake Coils. These tubes are manufactured as per International and National Standards required by client.

All tubes are electronically tested by Eddy Current method, as per the requirements of ASTM E 243.

Trychem Copper tubes are 100% carbon free. All tubes are cleaned and sample tested to meet the residual requirements as specified by the codes at 0.038g/m2 (0.35g/ft2).

Coils are normally furnished in ‘O60’ temper and straight lengths in H58 temper.

100% RoHS Compliance.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Trychem Metal And Alloys uses advanced Professional equipment to manufacture pipe fittings in accordance with relevant international & national products standards.

All products are manufactured conforming to relevant products standards as follows:
American standard ANSI/ASME B16.22-2001 and Japanese standard JISH3401.
European standards: European Community's standard EN1254-1, British standard BS864-2 and German standard DIN2856.

ELBOWS:
Available in 90 and 45 angles, our elbows are perfect fitments for angular joints changing the direction of the pipe and have a close radius to fit in the tightest possible space. Many other varieties are available for specific requirements.

U-BENDS:
Ideal for compact applications, our U-bends are used to accommodate the return flow of the coolant, providing a 180 turn in a much smaller space. We manufacture both expanded as well as plain U-bends for condensers and evaporators.

COUPLINGS:
We offer couplings in various dimensions, which are used to connect two pipes of different diameters as well as to joint two identical size tubes together.

TEE:
Tee is a fitting in the shape of a 'T' where top of it is the continuous pipe run and the vertical section is a branch connected to it. Tees offer multiple options and used in a variety of applications. We offer varieties of Tees multiple dimensions like one end having smaller diameter and cross Tees, which are used to connect four tubes or a threaded Tee when the vertical section of it has female threads

REDUCER:
Reducers are a type of fitting which is used to connect two copper pipes. They come in many different sizes allowing us to use one copper fitting for these copper pipe connections. The general sizes available are 1/2” x 1/4”, 1/2” x 3/8”, 5/8” x 1/4”, 5/8” x 3/8”, 5/8” x 1/2”, 3/4” x 1/2”, 1” x 1/2", 1” x 3/4”, etc as per the client specification.

Non-Standard Fittings:
Trychem Metal And Alloys also manufactures non standard custom made fittings as per client design and specifications.

Product Details:

Copper Shims available with us are highly heat resistant and light in terms of weight. These tapes find wide application as a coil form in switch terminals as well as in ion electric conductors.

These shims are fabricated using quality Copper and are known by the name of Electrolytic grade Copper strips. These tapes are available in different specifications as demanded by clients in terms of thicknesses and other finish properties.

Features:

• Electrolytic High conductivity
• Soft Hardness
• ETP Grade finish.

Product Details:

Trychem Metal And Alloys is one of the leading manufacturers and suppliers of optimum quality copper rods. These rods are known for their dimensional accuracy, high grade raw material, structural robustness and superior finish. Engineering sector and electrical industry find maximum usage of these copper rods.

Trychem Metal and Alloys manufactures extruded and drawn copper rods in many shapes such as round, hexagonal, square or rectangular bars and in various dimensions.

Anti microbial properties of copper makes copper rods the most effective material for hygienic touch surfaces (in hospitals and other healthcare facilities or public buildings).

FORM AND LENGTH:
STRAIGHT LENGTH:
Drawn round, hexagonal and square rods: 2000 - 4000 (soft temper max. 3000 mm)
Drawn bars: 2000 - 6000 (soft temper max. 3000 mm).
Extruded rods and bars: 1000 - 4000 mm
“On customer's request, upon agreement, other sizes, lengths and properties are also possible.”

Grades:
Oxygen Free High Conductivity Copper (OFHC).
Electrolytic Tough Pitch (ETP).
Chromium Copper.
Cadmium Copper.
Silver Bearing Copper.
Various Others Grades On Request.

Product Details:

Trychem Metal And Alloys is one of the leading manufacturers, exporters and suppliers of a complete line of 63/37 Brass Tubes. These are manufactured by adept technicians in accordance to the set domain guidelines & norms to ensure excellent performance, durability, rugged construction, reliable operation and corrosion resistance. Available in both standard & customized forms, our 63/37 Brass Tubes are affordable in prices and find usage in diverse industries across the globe.

Application
Sugar Industry
Plumbing
Furniture
Hand Pumps
Ammunitions
General Engineering

Product Details:

We specialize in manufacturing, exporting and supplying 70/30 Brass Tubes of finest grade. The 70/30 Brass Tubes also known as "Sugar Brass Tubes" are manufactured at our own unit by the experts. The 70/30 Brass Tubes are available in diverse specifications and grades to cater to the diverse requirements of the clients.

Application
Sugar Industry
Plumbing
Furniture
Hand Pumps
Ammunitions
General Engineering

Product Details:

Our company is enlisted amongst the well-reputed Brass Strips Suppliers in India. The unmatched quality and unsurpassable performance of the High Precision Brass Strips in respective applications has attracted various industrial sectors. The notable features i.e. high durability, tensile strength and resistivity to adverse conditions have also made Metal Brass Strips the foremost choice of clients. 

Product Details:

Copper Strips are used in all earthings, electrical conductors,switch terminals, hardware used in electrical circuits, and electrical contacts.Strips are manufactured with minimum cambers and excellent surface finish.

Further this stips could be processed with tin / silver / nickel coating on them.

Our copper strips are available in the following specifications:
Width 3 mm to 160 mm
Thickness 0.5 mm to 10 mm

Available Grades: ASTM B 68, ASTM B 75, BS 2871 Part 2, BS 2871 Part 3, EN 12451.

Applications:

• Chillers
• Heat Exchangers & Condensers
• Power Plants
• Refineries
• Ship Building & Ship Repairs
• Defense
• Gas Hydro Power Projects

Product Details:

Copper Flat find many applications as Electrical Conductors, Switch Terminals, Hardware used in Electrical Circuits, Electrical Contacts. These copper flat products are available in Hard, Half-hard and Soft condition.

Material with minimum copper content of 99.9% as per IS 191:
SIZE WIDTH: 3 mm to 160 mm.
THICKNESS: 0.5 mm to 10 mm.

Material with minimum copper content of 99.9% as per IS 191 & IS 1897 copper silver/copper nickel:
SIZE WIDTH: 5 mm to 350 mm.
THICKNESS: 1mm to 60 mm.

EDGE: Square Edge, Radius Edge, Full Radius Edge.

Length: Up to 6400mm (21`) (depending on section) with standard overall cutting tolerance of 100mm.

SURFACE TREATMENT: Our Copper Flat Bar can be Electro-plated with Tin or Silver.